BRGHG - MOBIL SUPER HP 10W-30
- MSDS: BRGHG
- Manufacturer: MOBIL OIL CORP
- Product Name: MOBIL SUPER HP 10W-30
- National Stock Number: 9150-00-186-6703
Product Identification
Product ID:MOBIL SUPER HP 10W-30
MSDS Date:05/21/1993
FSC:9150
NIIN:00-186-6703
MSDS Number: BRGHG
Responsible Party
FAIRFAX, VA 22037-0001
US
Emergency Phone: 609-737-4411,800-424-9300(CHEMTREC)
Info Phone: 800-662-4525, 800-227-0707 X3265
Cage: 3U728
Contractor
Telephone: 609-737-4411/800-424-9300(CHEMTREC)
Cage: 19135
Ingredients
PRODUCT CONTAINS ONE OR MORE OF THE FOLLOWING BASE OILS.
RTECS: 9999999ZZ
Fraction By Weight: >80%
OSHA PEL 5 MG/M3 (OIL MIST)
ACGIH TLV: 5 MG/M3(OIL MIST)923
DISTILLATES (PETROLEUM), HYDROTREATED HEAVY PARAFFINIC
CAS: 64742-54-7
RTECS: PY8035500
Fraction By Weight: 0- >80%
DISTILLATES (PETROLEUM), SOLVENT-DEWAXED HEAVY PARAFFINIC
CAS: 64742-65-0
RTECS: PY8038500
Fraction By Weight: 0- >80%
DISTILLATES (PETROLEUM), SOLVENT-REFINED HEAVY PARAFFINIC
CAS: 64741-88-4
RTECS: PY8040500
Fraction By Weight: 0- >80%
OSHA PEL 5 MG/M3 (OIL MIST)
ACGIH TLV: 5 MG/M3(OIL MIST)923
PHOSPHORODITHIOIC ACID, O,O-DI-C1-14 ALKYL ESTERS, ZINC
CAS: 68649-42-3
Fraction By Weight: 1.15%
PRODUCT MAY CONTAIN ONE OR MORE OF THE FOLLOWING ADDITIVE
RTECS: 9999999ZZ
BORATED ALKYL AMIDES
Fraction By Weight: <4.00%
BORATED AMINATED POLYBUTENYL SUCCINIC ANHYDRIDE
Fraction By Weight: <4.00%
POLYOLEFIN AMIDE ALKENAMINE
Fraction By Weight: <3.00%
CALCIUM SULFONATE
Fraction By Weight: <2.00%
AMINES, POLYETHYLENEPOLY-, REACTION PRODUCTS WITH SUCCINIC
Fraction By Weight: <2.00%
Hazards
LD50 LC50 Mixture:LD50 (ORAL RAT) IS >2000 MG/KG.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NO SIGNIFICANT EFFECTS EXPECTED.
Effects of Overexposure:NO SIGNIFICIANT EFFECTS EXPECTED.
Medical Cond Aggravated by Exposure:PERSONS WITH A HISTORY OF AILMENTS
OR WITH A PRE-EXISTING DISEASE INVOLVING THE EYES, SKIN, OR
RESPIRATORY TRACT MAY BE AT INCREASED RISK FROM EXPOSURE.
First Aid
First Aid:EYES: FLUSH WITH LARGE AMOUNTS OF WATER. GET MEDICAL
ATTENTION. SKIN: REMOVE CONTAMINATED CLOTHING. WASH AREA WITH SOAP
AND WATER. INHALATION: MOVE TO FRESH AIR. IF RESPIRATORY
IRRITATION, DIZZINESS, NAUSEA, OR UNCONSCIOUSNESS OCCURS, GET
MEDICAL ATTENTION. IF BREATHING HAS STOPPED GIVE CPR. GET MEDICAL
ATTENTION. INGESTION: GIVE 2 GLASSES OF WATER. DO NOT INDUCE
VOMITING. GET MEDICAL ATTENTION.
Fire Fighting
Flash Point Method:COC
Flash Point:>390F,>199C
Lower Limits:0.6
Upper Limits:7.0
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:WATER OR FOG MAY CAUSE FROTHING. USE WATER TO
KEEP FIRE EXPOSED CONTAINERS COOL. WATER SPRAY MAY BE USED FLUSH
SPILLS AWAY FROM EXPOSURE.
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:TREAT AS OIL SPILL.CONTAIN AND ABSORB ON FIRE
RETARDANT TREATED SAWDUST OR DIATOMACEOUS EARTH.SHOVEL INTO
CONTAINERS FOR LATER DISPOSAL.DO NOT ALLOW PRODUCT TO ENTER
DRAINS,SEWERS, OR WATERWAYS.REPORT SPILLS AS REQUIRED TO
APPROPRIATE AUTHORITIES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NO SPECIAL PRECAUTIONS REQUIRED.
Other Precautions:NONE
Exposure Controls
Respiratory Protection:NO SPECIAL REQUIREMENTS UNDER ORDINARY
CONDITIONS OF USE AND WITH ADEQUATE VENTILATION.
Ventilation:MECHANICAL (GENERAL) ROOM VENTILATION IS NORMALLY ADEQUATE.
Protective Gloves:NONE NORMALLY REQUIRED.
Eye Protection:NORMAL INDUSTRIAL EYE PROTECTION.
Other Protective Equipment:NONE
Work Hygienic Practices:WASH AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
Chemical Properties
HCC:V6
Boiling Pt:B.P. Text:>600F,>316C
Vapor Pres:<0.1
Spec Gravity:0.877
Solubility in Water:NEGLIGIBLE
Appearance and Odor:DARK AMBER LIQUID. MILD ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXTREME HEAT.
Hazardous Decomposition Products:CARBON MONOXIDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
Disposal
Waste Disposal Methods:DISPOSE OF WASTE IN ACCORDANCE WITH LOCAL, STATE
AND FEDERAL REGULATIONS. PRODUCT IS SUITABLE FOR BURNING IN AN
ENCLOSED, CONTROLLED BURNER FOR FUEL VALUE OR DISPOSAL BY
SUPERVISED INCINERATION.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.